tech specs
| MEMS microphones | 84 |
| Individually calibrated | Yes |
| Frequency range | 20 Hz – 20 kHz |
| Equivalent self noise | 3 dB-A / 12 dB CCIR (in ultra-sensitive mode) |
| Acoustic overload point | 130 dB SPL |
| Temperature compensation | Yes |
| Orientation sensor | Yes |
| Connector | USB-C |
| Diameter | 170 mm |
| Depth | 5.6 mm |
| Latency | 3 ms |
| Ambisonic resolution | 3rd order 3D |
| Spatial aliasing frequency (not to be confused with sampling aliasing) | 15 kHz |
| Beamforming resolution | 5th order 3D |
| Field recording app | Mac OS, Windows |
| Studio DAW plugin | VST, AU, AAX |
| Sample rate | 44.1 – 96 kHz |
| Sample clock synchronization | Automatic |
| Driver installation | No *) |
| Bottom microphone mount | 3/8” |
| Top camera mount | Optional |
| Mass | 168 g |
| Temperature range | –45 C to +85 C |
* Software version 0.9 and newer for Windows (currently in beta) includes an ASIO driver. Earlier Windows versions do not require driver installation. MacOS does not require a driver.
spcmic
Mount a 360 camera on top of the spacemic to complement 360 audio with 360 video! The microphone will be in the blind zone of the camera, thus appearing invisible in the video recording. Warning! A heavy camera and / or rapid movement might impart excessive forces and permanently damage the spacemic. Only intended for light cameras and stationary shots.
Kit includes:
- blades that insert into the top of the spacemic
- clip that locks the blades in place
- screw
- thumb nut to fasten the blades
- 5/8 ” to 1/2 ” female thread adapter
- 1/2 ” female to male thread adapter
€1.999